GUNMETAL IMPACT SPRINKLER

Our supreme quality range of Gunmetal Impact Sprinklers is used in agricultural irrigation to facilitate water for vegetation. It is used to supply water via plumbing fitting as on a schedule. available in both low and high weight to perform at low high pressures.

Advantages of Sprinkler Irrigation System

Uniform distribution of water in slope area
Sprinkler irrigation does not require surface shaping of leveling
Has the ability to keep the soil soft for emerging seedlings with frequent short irrigation
Can be applied to the area of variable topography
Promotes rapid germination and crop establishment
Chemical and fertilizer applications are easily used with a sprinkler system

GLW 330 - 350 grms

Overhead sprinkler with 3/4" BSP/NPT male threaded connection and 27° trajectory angle. Body and arm made of Gunmetal for durability. Used for all crops irrigation compatible by overhead irrigation on a solid set, permanent set, hard lines, portable lines, wheel lines, and mechanically moved system such as center pivot. Also useful for areas where strong wind is prevalent.

Features

3/4" BSP/NPT male threaded

Durable Gunmetal Body & Arm

Heavy-duty Brass Nut &Tube

Stainless Steel Pivot Pin and springs

Bearing & Sealing washes are made of material for extending life.

Recommended Pressure 1.0 - 3.5 kg/cm2 or 14 - 50Psi

Recommended spacing up to 15m for higher distribution uniformity.

Trajectory Angle: 27°

GMW 380 grms

Overhead sprinkler with 3/4 ” BSP/NPT male threaded connection and 27° trajectory angle. Body and arm made of Gunmetal for durability. Designed for full-field irrigation of field crops. Primarily used in irrigation by overhead irrigation solid set systems – portable or permanent.

Features

· Available in 3/4 " BSP/NPT male threaded

· Durable Gunmetal Body and Arm.

· Heavy duty Brass Nut, Tube, and nozzles.

· Stainless Steel Pivot Pin and springs.

· Recommended Pressure 1.0 - 3.5 kg/cm2 or 14 - 50 Psi

· Recommended spacing up to 21m for higher distribution uniformity.

· Trajectory Angle: 27°

GHW 400 grms

Overhead sprinkler with 3/4 " BSP/NPT male threaded connection and 27° trajectory angle. Body and arm made of Gunmetal for durability. Designed for full-field irrigation of field crops. Primarily used in irrigation by overhead irrigation solid set systems – portable or permanent. Specially designed for large precipitation rate and spacing.

Features

· 3/4" BSP/NPT male threaded and

· Specially designed for large precipitation rate and spacing.

· Durable Gunmetal Body and Arm

· Heavy-duty Brass Nut & Tube

· Stainless Steel Pivot Pin, Springs

· Recommended Pressure 1.0 - 3.5 kg/cm2 or 14 - 50Psi

· Recommended spacing up to 18m for higher distribution uniformity

Trajectory Angle: 27°

BRASS MINI SPRINKLER

Overhead sprinkler with 1/2 ” BSP/NPT male threaded connection and 27° trajectory angle. Body and arm made of Gunmetal for durability. Designed for full-field irrigation of field crops. Primarily used in irrigation by overhead irrigation solid set systems – portable or permanent.

Features

· Available in 1/2 " BSP/NPT male threaded

· Durable Gunmetal Body and Arm.

· Heavy duty Brass Nut, Tube, and nozzles.

· Stainless Steel Pivot Pin and springs.

· Recommended Pressure 1.0 - 3.5 kg/cm2 or 14 - 50 Psi

· Recommended spacing up to 21m for higher distribution uniformity.

· Trajectory Angle: 27°